XFILES-S CAN BE EQUIPPED WITH 4 DIFFERENT TYPES OF MAGAZINES:
HIGH SINGLE LEVEL, has a single loading plane of 300mm positioned at guide channel height that is automatically adjusted to the process bar diameter by PLC. To guarantee operator safety, the high single level is protected by the front loader door which, when opened by means of a safety hinge, inhibits dangerous movements. MULTI-LEVEL 3 LEVELS, has 3 300mm load levels positioned one above the other from ground to channel height and are managed by a micro switch to detect the bar and determine any empty levels. The bar diameter is adjusted manually by the operator using a micro metric screw. To guarantee operator safety, the multi-level 3-level is protected by barriers which, if interrupted, inhibit dangerous load lifter movements leaving the bar loading area free and accessible to the operator. LOW SINGLE LEVEL comes in three versions of 300-500-700mm load floor capacity positioned at a height between 500mm and 900mm from the ground according to the channel height. The single level is managed by a micro switch to detect the bar, bar diameter is adjusted manually by the operator through a micro metric screw. To guarantee operator safety, the low single level is protected by barriers which, if interrupted, inhibit the dangerous load lifter movements leaving the bar loading area free and accessible to the operator. BUNDLE, has a load capacity of 2000Kg and a bar storage area of 400x400mm. It allows you to load the bundle of bars that comes from the ironworks then, through the motorised polyurethane belts, separate the bars individually to feed the loader. The bar diameter is adjusted manually by the operator through a micro metric screw, it is a system suitable for large mass production. To guarantee operator safety, the bundle is protected by barriers which, if interrupted, inhibit dangerous load lifter and motorised belt movements leaving the bar loading area free and accessible to the operator.